This candidate thesis contains the possibility of expand the Swedish photovoltaic market through photovoltaic cooperatives and a photovoltaic exchange. In the current situation there is a lot of problems with production of electricity from photovoltaic, that?s why we show some possibilities how to avoid these. To understand the problem with photovoltaic produced electricity we first give you a background.We show how to expand the Swedish photovoltaic market by describing how a photovoltaic cooperative and photovoltaic exchange could work in Sweden. It have been confirmed from our market research that the interest of photovoltaic cooperative and exchange is high.To find out how profitable photovoltaic is in Sweden, have three projections been made.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

This thesis aims to identify the building integrated photovoltaic solutions available in the market with respect to general pros and cons of different systems and a technical description of there attachment system. Investigate and provide examples of various building integrated photovoltaic solutions in Sweden and describe the experiences and results of these projects.The methods used to obtain relevant information are interviews with individuals involved in significant projects and a thorough search of different solutions from solar suppliers.The conclusion is that solar energy is needed for a sustainable society. There are endless opportunities regarding BIPV, with many companies with different products and individual solutions. But so far it?s not so customary in Sweden.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of Photovoltaic modules from four different manufacturers.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

The present project was initiated with the aim to create pattern modules for use in public environments. My intention was to let the properties, of the specific materials used, have a marked influence on the realisation of the final form. I also wanted to find a material, which is suitable from the perspective of sustainabilityand possibilities to create modules from it. The work was initiated with a study of some candidate materials and many sketches before I finally made my choice. My decision was clear after a visit to the company Glasfabriken inKalmar.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

One of the city of Stockholm?s main objectives is to have a society completely free from fossil fuels. To achieve this, several investments regarding improvements in energy efficiency and renewable energy are currently being planned or implemented. One of these investments is a project called Hallbara Jarva which is located in the suburbs of Stockholm. The purpose of this thesis is to examine the prospects of an investment in photovoltaic cells from an energy-saving and economical point of view. The analysis is limited to three buildings within Hallbara Jarva and is intended for the property owner.  Solar energy is a type of renewable energy source and is commonly divided into solar heating and solar power.

The City of Stockholm has decided to invest in renewable energy and especially in photovoltaics. The objective of this thesis is to investigate the photovoltaic potential on roof areas that the city possesses and to further investigate some buildings of the Property Management Department. The thesis also compares some existing photovoltaic plants with the solar irradiance map which shows available roof area on each building in Stockholm. The report ends with a literature study about the climate impact and greenhouse gas emissions of photovoltaic.The total available roof area suitable for photovoltaic plants is estimated to 700 000 m2, with a potential electricity production of 110 GWh per year. This corresponds to 17 % of the City of Stockholm?s yearly electricity consumption.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.